SIEMENS FSā¢ PRO 140 + Whole House Ferrites EMP Home Protection Kit
Protecting your home or shop from the threat of EMP is critical. Having the correct components installed to protect your home or shop is just as critical. The best way we know to do that is by taking 3 simple steps highlighted below. The FIRSTSURGEā¢ PRO 140 KA fulfills one of the most important steps, which is having a quality whole-house surge protection device.
High-Saturation Whole House Ferrites are made of special high-frequency material and uniquely modified to help prevent high-current saturation. A ferrite is clamped around the insulated incoming power wires in your breaker panel. Most homes require three ferrites, but a few homes may require four ferrites (see video below).
Ferrite dimensions: Inner Diameter 0.72ā³, Outer Diameter 1.5ā³, Length 1.9ā³.
This Kit contains 3 High Saturation Whole House Ferrites + FIRSTSURGEā¢ PRO 140 KA
3 x High Saturation Whole House Ferrites
1 x FIRSTSURGEā¢ PRO 140 KA
Ā
How to Protect your Home from an EMP or Solar CME
Please watch the video below for a more complete understanding of how to protect your home from an EMP or CME.
As you can see from the video, I recommend a three-step approach to home protection.
Step 1: Install custom high-saturation ferrites over your incoming power wires. Normal ferrites will not work well due to current saturation. The ferrites sold here are each individually modified to increase their saturation levels, allowing them to suppress high-frequency energy under higher currents. Note: Most homes require three ferrites (for Line 1, Line 2, and a shared Neutral/Ground). Some homes may have four wires and therefore, would need four ferrites (Line 1, Line 2, Neutral, and Ground). Order now while in stock.
Below is a typical installation. Always consult the manufacturerās instructions and have a professional electrician do the installation for safety. Please note that ferrites tend to make a humming or buzzing noise when high currents flow through them.
Ā
Step 2: Install a quality whole-house surge protection device. Recommended device: Siemens FirstSurge140 (FS140). Installation should be done by a licensed electrician.
Step 3. Install smaller broadband ferrites around power cords of sensitive electronics. We sell a number of different sizes, as well as some bundles.
Watch the video below for tips on the installation of the ferrites.
- Surge Protection Device: Single Phase, 120/240V AC
- Letās you know you are protected via LEDās & audible alarm
- Surge current capacity sized for where you live
- FirstSurge protects any 120/240V branded load center
- FirstSurge Surge Protective Devices (SPDs) are Type 2 and UL / cUL 1449 listed, meeting designated protection requirements
- FirstSurge is constructed using commercial grade NEMA 4X enclosure, allowing for indoor or outdoor installations
- FirstSurge Pro provides 140,000 Amp of surge current capacity per phase
- Compatible with any brand of load center and breakers
- Enclosure rated for type 4 outdoor and can also be installed inside the load center
- 10-year product and connected equipment warranty
Ā
Other recommended EMP Home Protection devices:
Bringing Data Protection and Security to Families
American Reserves is now offering you a range of reliable products that offer radio frequency (RF) shielding, data security, and electromagnetic pulse (EMP) protection. These products are specifically engineered to mitigate the impact of signal-producing devices on your health and security.
